00934C SC-MS10 USA~089
Photo Mode : Setting the Capturing Options
Adjusting the Exposure – Exposure Compensation
You can manually make exposure adjustments using EV Exposure Compensation which allows
users to control the amount of light manually when the shutter-release button is released.
1. Set the Mode Dial to
2. Press the [POWER] button to turn on the device.
3. Press the [MENU] button.
◆
Menu screen appears.
4. Move the joystick left / right (œ œ /√ √ ) to select <EV>.
5. Select an option by moving the joystick up / down (▲/▼), and then press the
[OK] button.
◆
-2.0 / -1.6 / -1/3 / -1.0 / -0.6 / -0.3 / 0 / +0.3 / +0.6 / +1.0 / +1.3 / +1.6 / +2.0
◆
The screen brightness gets darker when the EV settings goes to a negative setting and
gets brighter when it goes to a positive setting.
6. Press the [MENU] button to exit the menu.
◆
An icon indicating the selected <EV> mode appears on the screen.
[ Warning ]
✤
Do not let the CCD be exposed to a strong light source for a long time. It may damage the CCD.
[ Notes ]
✤
EV compensation can be set only in <Manual> Scene mode. By default, the scene mode is set to <Auto>.
✤
While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
9/30/05 10:56 AM
Page 69
Photo
mode.
ENGLISH
3
IN
2592
EV
0
4
Photo
Photo
ISO
Photo
EV
EV
+0.6
EV
+0.3
0
-0.3
Move
Move
Select
Select
MENU
Exit
Exit
Move
Select
Exit
Photo
EV
Photo
EV
Move
Select
Exit
Move
Select
Exit
69
69