Warning Indicator - Samsung L74 User Manual

Important notes
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens
and LCD assemblies. If this does not work, lens-cleaning paper with lens
cleaning fluid can be used. Clean the camera body with a soft cloth. Do
not allow this camera to come into contact with solvent materials such
as benzol, insecticide, thinners etc. This may damage the body shell of
the camera and also affect its performance. Rough handling can damage
the LCD monitor. Take care to avoid damage and keep the camera in its
protective carry case at all times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This
is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded (when the charger and USB
cable are inserted into the cradle at the same time), the data transfer may be
affected by static electricity. In this case, disconnect and re-connect the USB
cable before trying the transfer again.
Before an important event or going on a trip, you should check the camera
condition.
- Take a picture to test the camera and always carry a spare fully charged
battery.
- Samsung cannot be held responsible for camera malfunctions.

Warning indicator

There are several warnings that may appear on the LCD display.
Memory Error!
Memory card error
Turn off the camera power and turn it on again.
Insert the memory card again.
Insert and format the memory card (p.74).
Card Locked!
The memory card is locked
SD memory card : Slide the write protect switch towards the top of the
memory card.
No Space!
The memory card or internal memory is full.
Insert new memory card.
Delete the unnecessary image files
No Image!
There are no images stored on the memory
Take images.
Insert a memory card that is holding some images.
File Error!
File error
Delete the erroneous files.
Memory card error
Contact a camera service centre.