Samsung L74 User Manual page 14

Instructions on how to use the memory card
If the memory card is subjected to any of the following, the recorded data
may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
If there is insufficient memory available : A [Memory Full!] message will
appear and the camera will not operate. To optimise the amount of memory
in the camera, replace the memory card or delete unnecessary images
stored on the memory card.
INFORMATION
Don't remove the memory card when the camera status lamp is blinking
as this may cause damage to data in the memory card.
The camera can use SD/SDHC Memory Cards and MMC (Multi Media
Cards). When using MMC cards, please consult the instructions supplied
with the cards.
Card pins
Write protect
switch
Label
[SD (Secure Digital) memory card]
When using a 256MB MMC memory, the specified shooting capacity will
be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded image size Super Fine
63
74
89
Still
image
88
131
381
-
*Movie
-
-
The recording times can be changed by the zoom operation.
The zoom button doesn't operate while recording movies.
The SD/SDHC memory card has a write
protect switch that prevents image files from
being deleted or formatted. By sliding the
switch towards the bottom of the SD memory
card, the data will be protected. By sliding
the switch towards the top of the SD memory
card, the data protection will becancelled.
Slide the switch to the top of the SD memory
card before taking a picture.
Fine Normal 30FPS 20FPS
116 171 - -
137 192 - -
166 229 - -
162 223 - -
236 318 - -
520 600 - -
- - - About 11'
- - About 13' -
- - About 29' -
15FPS
-
-
-
-
-
-
-
About 21'
About 54'
13