6. System Set-Up
As
(For Medium Temperature) is designed to satisfy various installation environment, it is
Hydro Kit
important to set up system correctly. If not configured correctly, improper operation or degrade of per-
formance can be expected.
DIP Switch Setting
Description
1 2 3 4 5 6 7 8
x
Group Control
●
Installation
Scene
Emergency
operation
Water pump
control
Antifreeze oper-
ation mode
Thermostat
conncetion
※ short key
• Turn off electric power supply before setting dip switch.
There is risk of electric shock.
• Dip switch is turned on when pulled down.
• If dip switch is not set as below, the unit may not operate
properly.
Dip switch setting
x x
● x
x ●
● ●
x
●
x
●
● x
● ●
●
CAUTION:
After adding brine(Anti-freeze) only the Water circuit can be set to Anti
Freeze mode.
Otherwise the product may malfunction due to freezing and bursting.
WARNING:
Do not add brine(Anti-freeze) during Hot water mode.
Function
Master
Floor heating only
Floor heating + Hot water + solar booster
Floor heating + Hot water
Hot water only
High temperature operation
Low temperature operation
Water pump controlled with Hydro Kit
Water pump NOT controlled with Hydro Kit
Nomal operation mode (connect short key)
Antifreeze operation mode (disconnect short key)
x
Thermostat NOT installed
Thermostat installed
Hydro Kit Installation Manual 43
System Set-Up
x
: OFF
Slave
●
: On
Default
○
○
○
○
○
○