System Requirements - JL Audio VX1000/5i Connection Manual

SYSTEM REQUIREMENTS

To configure the TwK™ System Tuning DSP, you will need to connect a PC
to the TwK™ processor using the included USB cable, and launch the JL Audio
TüN™ software. When finished, unplug the USB cable from the TwK™ processor.
If you do not have the TüN™ software, you can download it for free by visiting:
Use of the software implies you agree to the accompanying License Agreement.
Once installed on your PC, the TüN™ software can be operated in
"Simulation Mode", allowing you to familiarize yourself with the interface
and create configurations, while not connected to a TwK™.
Minimum PC Requirements:
OS: Windows 7 SP1/Win 8.1/Win 10; 32 bit or 64 bit
Screen Resolution: 1280 x 768
CPU: 1GHz
RAM: 1GB for 32 bit, 2GB for 64 bit
Disk: 256MB free space
Recommended PC Requirements:
OS: Windows 7 SP1/Win 8.1/ Win 10; 32 bit or 64 bit
Screen Resolution: 1400 x 1050
CPU: Dual core 2.5GHz
RAM: 1GB for 32 bit, 2GB for 64 bit
Disk: 256MB free space
WARNING: DO NOT ATTEMPT TO ADJUST OR OTHERWISE USE THIS
SOFTWARE WHILE OPERATING A MOTOR VEHICLE OR VESSEL.
TwK™ - TüN™ SOFTWARE OVERVIEW
TüN™ is JL Audio's DSP tuning software for the PC platform. It has been
developed to control and manage JL Audio DSP products. TüN™ is designed
to automatically recognize which product(s) it is connected to, allowing you to
select one at a time, configuring its interface appropriately for that product.
While the TüN software is designed to work with multiple JL Audio DSP
platforms, this particular document is focused on TüN™ connected to one of
JL Audio's TwK™ System Tuning DSPs. This overview was written for release
version 2.56.145 of the TüN™ software. Some details may vary in future updates
and releases. Please consult the online help or the support section of the JL Audio
website for the most up-to-date information, and for in-depth explanations of the
TüN™ software.
Page 2
If you have any questions about the
installation or setup of the software
not covered in this overview, please
contact your dealer or technical
support.
The answers to most questions can
also be found in the JL Audio Help
Center which is available anytime
online. Visit: jlaudio.com/support
JL Audio Technical Support:
(954) 443-1100
9:00 AM – 5:30 PM
(Eastern Time Zone)
Monday - Friday
WARNING
|