Starting The Slide Show - Samsung DIGIMAX I50 User Manual

Starting the slide show

■ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Slide] menu tab.
● Start the slide show : The slide show can start only in the [Start] menu.
1. Use the Up/Down buttons to select the [Start] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
show.
- To stop the slide show, press the play & pause button, and
then press the LEFT or RIGHT button.
● Setting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the UP/DOWN
button and press the RIGHT button.
2. Use the Up/ Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
● Repeat setting : Setting the slide show to repeat after the first cycle.
1. Use the Up/ Down buttons to select the [Repeat] menu and
press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[On] selected : The slide show is repeated until cancelled.
[Off] selected : The slide show is closed after one cycle.
3. Press the OK button to save the configuration.
INFORMATION
● The loading time depends on the image size and quality.
● While the slide show is playing, only the first frame of a MOVIE file is displayed.
● While the slide show is playing, the voice recording file will not display.
《78》
) again to resume the slide
Slide
Start
1 sec
Interval
Repeat Off
Cancel
Effect
Move: Set:OK
Slide
1 sec
Start
Interval
3 sec
Repeat 5 sec
10 sec
Effect
Back:◀ Set:OK
Slide
Start Off
Interval
On
Repeat
Effect
Back:◀ Set:OK