Installing The Sun2000 - Huawei SUN2000-90KTL Quick Manual

3

Installing the SUN2000

•
The M12x40 bolt assemblies are delivered with
the SUN2000. If the bolt assembly length does
not meet the installation requirements, prepare
M12 bolt assemblies by yourself and use them
together with the delivered M12 nuts.
•
Before installing the mounting bracket, remove
the security Torx wrench from the mounting
bracket and save it for later use.
•
This document introduces how to install the
SUN2000 on a support as an example. For
details about wall-mounted installation, see the
user manual.
1. Install the mounting bracket.
You are advised to apply anti-rust paint
on the hole positions for protection.
2. Install the SUN2000 on the mounting bracket. 3. Tighten security Torx screws.
3
Position for bundling a
security Torx wrench