Starting The Slide Show - Samsung DIGIMAX A7 User Manual

Starting the slide show

❾✃ Images can be displayed continuously at pre-set intervals.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
❾➴ Setting play interval: Set the slide show play interval.
1. Use the Up/Down buttons to select the [INTERVAL] menu
and press the Right button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
❾➴ Repeat setting : Repeat or not the slide show after finishing the first cycle.
1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[OFF] Selected : The slide show is closed after one cycle.
[ON] selected
3. Press the OK button to save the configuration.
❾➴ Start the slide show: The slide show can start only in the [START] menu.
1. Use the Up/Down buttons to select the [START] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
- Press the Menu button to stop the slide show.
INFORMATION
❾➴ The loading time depends on the image size and quality.
❾➴ The slide show will start from an image that was displayed on the LCD monitor.
The [PWR SAVE] function can't be activated.
❾➴ While the slide show is playing, only the first frame of an MOVIE file is displayed.
: The slide show is repeated until canceled.
) again to resume the slide show.
2048
SLIDE
INTERVAL 3 SEC
REPEAT ON
START
EXIT:MENU MOVE:
❾➓61❾➔