❾➴+/- Button - Samsung DIGIMAX A7 User Manual

+/- button
❾✃ You can use the +/- button to adjust the values for the ISO, white balance and exposure
compensation.
Main menu
ISO
WHITE BALANCE
Exposure compensation
❾✃ ISO: You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
❾➴ Selecting an ISO Sensitivity
1. Press the +/- button, and then use the UP and DOWN
buttons to select the ISO icon(
will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO
- 100, 200, 400
3. When you press the +/- button again, the value you set will be saved and ISO setup mode
will end.
Sub menu
AUTO, 100, 200, 400
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H, FLUORESCENT L,
TUNGSTEN, CUSTOM.
-2.0 ~ 0.0 ~ +2.0(0.5EV steps)
). The ISO menu bar
: The camera's sensitivity is
automatically changed by variables
such as lighting value or subject brightness.
: You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be
saturated in high luminance. The higher the ISO value, the higher the
camera's sensitivity to light is and therefore the greater its capacity to
take pictures in dark conditions. However, the noise level in the image
will increase as the ISO value increases, making the image appear
coarse.
Available camera mode
❾➓35❾➔