Exposure Compensation - Ricoh CX4 User Manual

Note -------------------------------------------------------------------------------------
• When [Focus] is set to [MF], the first picture is taken at the set focus position
without being measured.
• [White Balance] functions according to the [Auto] setting even if it is set to
[Multi-P AUTO].
• Photographs are taken and recorded in the following order:
Focus position
Shooting order
Recording order
( )
Focus set using the option currently selected for [Focus] (GP.73).
*

Exposure Compensation

Use exposure compensation to vary exposure from the value selected
by the camera. Choose from values between –2 and +2; negative
values produce darker pictures, positive values brighter pictures.
Exposure compensation may be required in the following situations:
For backlighting
When the background is particularly bright, the subject will appear
5
dark (underexposed). In this case, set the exposure level higher (+).
When your subject is whitish
The entire picture will turn out dark (underexposed). Set the exposure
level higher (+).
When your subject is darkish
The entire picture will turn out bright (overexposed). Set the exposure
level lower (–). The same happens when you take a photo of a subject
in a spotlight.
Press the ADJ./OK button !" to choose
a exposure value and press the ADJ./OK
button. The selected value is displayed in
the picture display.
Note -------------------------------------------------------------------------------------
[Q] is displayed if the subject is too bright or too dark for exposure
82
compensation.
➝
Fore Center
5 4
5 4
➝
( )
*
1 3
3 2
9999 9999 9999 9999
– – –
EV EV EV EV 0.3 0.3 0.3 0.3
Back
2
1
4:3 F 4:3 F 4:3 F 3 F