Shooting Mode Types Scene Mode ( W ); Shooting Mode Types - Ricoh CX4 User Manual

3 Shooting Mode Types

Scene Mode ( W )
In scene mode, you can choose from one of the following 11 subject
types. Camera settings are automatically optimized for the selected
subject type.
Scene Modes
Portrait
3
Discreet Mode
Night. Port.
Night
Landscape
Multi-shot
52
Use for portraits. The camera
automatically detects up to eight
faces, and adjusts focus, exposure,
and white balance. The faces
detected by the camera are shown
by square borders.
The camera may not be able to recognize faces in the following
cases:
• When the face is side-view, tilted, or moving
• When the camera is tilted or upside down (the shutter release
button is facing down)
• When the face is partially hidden or at the edge of the frame
• When the face is not clearly visible because of dark
surroundings
• When the subject is too far away (Make sure that the face
appearing in the picture display is vertically longer than one
block marked by the grid guide. GP.40).
Use where lights and sounds emitted by the camera may be
unwelcome. The flash (GP.31), AF auxiliary light (GP.99), and
speaker (GP.100) turn off and flash, AF auxiliary light, and sound
settings can not be adjusted.
Use when taking portrait pictures against a nightscape. The flash
fires automatically. The shutter speed slows down, so be careful of
camera shake.
Use for night scenes. Blur caused by camera shake is reduced even
in handheld shots. Four shots are taken in succession and combined
to create a single image, increasing the time needed to record
photographs in comparison to other modes. The J icon is
always displayed when the shutter-release button is pressed halfway.
F3.5 F3.5 F3.5 F3.5 1/1000 1/1000 1/1000 1000 ISO 100 ISO 100 ISO 100 ISO 100