Long Time Exposure - Ricoh CX2 User Manual

Long Time Exposure

You can select [1 second], [2 seconds], [4 seconds], or [8 seconds]
for time exposure.
By using long time exposure, you can capture the movement of
moving subjects such as the trail of fireworks and car lights when
shooting a night scene.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button " to
select [Time Exposure] and
press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
• The setting appears on the screen.
Note ----------------------------------------------------------------------------------------------
• When using long time exposure, the shutter speed may slow down and images may
be blurred. Hold the camera steady by using a tripod when shooting.
• The camera shake correction function cannot be used when using long time
exposure. If long time exposure is set while the camera shake correction function is
turned on, E changes to F.
• While shooting with long time exposure, the picture display turns off.
• This function is not available for bracket shooting, multi-target AF, dynamic range
double-shot, easy shooting mode, or continuous mode.
• Long time-exposures are processed to reduce noise. The time required for processing
is roughly equivalent to the exposure time.
• The maximum ISO sensitivity for long time-exposures is ISO 400. If the value
currently selected by the user is between ISO 800 and ISO 1600, the camera will
automatically set ISO sensitivity to ISO 400 (GP.128).
4
1 Sec 1 Sec
117