Using The Dashboard Control System; Requirements; Control Interface Basic Components - AJA OG-3G-AMA Installation And Operation Manual

Using the DashBoard Control System

The DashBoard Control System, created by Ross Video, is available as a free
download from the Ross Video website:
https://www.rossvideo.com/control-systems/dashboard/products/dashboard/
Ross Video offers comprehensive documentation that covers the extensive
capabilities of the DashBoard Control System:
https://www.rossvideo.com/support/documentation/dashboard/
This manual addresses only those essential aspects of the DashBoard Control
System needed to control the OG-3G-AMA card.

Requirements

The DashBoard Control System requires the following components:
• openGear frame with a Frame Controller card
• Ethernet connection betweeen the controlling computer and the openGear
frame
NOTE: The openGear frame ships from AJA with the MFC-8322-S Frame Controller card
DashBoard automatically discovers openGear and DashBoard Connect devices,
such as openGear frames and cards that are present and accessible on your
network.

Control Interface Basic Components

The basic components of the DashBoard Control System user interface consist of
the basic tree view of frames and cards, the card information and status panel,
and the parameter controls panel. These elements are shown below in Figure 6.
The basic tree view of frames and cards shows the frames and cards that are
discoverable by DashBoard on your network.
The card information and status panel, shown in the middle panel, display the
basic status of the card currently selected in DashBoard.
The parameter controls panel shows the tabs and parameters that the selected
card has available for configuration and control.
OG-3G-AMA openGear Card v1.0
for controlling the new AJA DashBoard cards. The openGear frame also supports
the MFC-0G3-N Advanced Networking Frame Controller card, which can be used
to control compatible OG cards.
13 www.aja.com