NEC LT25 User Manual page 30

Zoom
Use the ZOOM lever to adjust the image size on the screen.
NOTE: Rotating the ZOOM lever will cause the focus to be ad-
justed automatically.
Auto Focus
The focus sensor on the projector detects the distance to the screen and automatically adjusts the focus of an image.
• The Auto Focus function will work when the following tasks are done:
- Turning on the power
- Changing the zoom lever
- Repositioning the projector
- Changing the projection angle
Effective auto focus range for screen 4:3
Throw distance
Minimum distance
Maximum distance
When the throw distance is beyond 5.5 m/216.5", it means that the focus sensor will not work correctly and that you
need to use the FOCUS button to adjust the focus manually.
NOTE: In some cases, the Auto Focus may not work correctly or the Auto Focus range can be made narrower, depending on the
environmental conditions.
The Auto Focus function will not work under the following circumstances
• When using a transparent screen.
• When there are objects between the focus sensor of the projector and the screen.
• When moving the projector so slowly that the focus sensor cannot detect the distance to the screen.
• When moving the screen, not the projector, because the focus sensor cannot detect the distance to the screen
TIP: To turn off the Auto Focus function, from the menu select [Setup - Options]
Tele (Zoom at min.)
55.1"/1.4 m
216.5"/5.5 m
3. Projecting an Image (Basic Operation)
Image size (inch)
32"
124"
[Auto Focus] and select [Off].
22
Wide (Zoom at max.)
39"
149"