Selecting A Source - NEC LT25 User Manual

Selecting a Source

Selecting the computer or video source
NOTE: Turn on the computer or VCR connected to the projector.
Selecting a source from the Source list
Press and quickly release the SOURCE button on the projector cabinet
to display the Source list. Each time the SOURCE button is pressed,
each source name will be highlighted in sequence.
Press the ENTER button or allow 2 seconds to elapse.
The selected signal will be displayed.
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 2 seconds, the
projector will search for the next available input source.
Using the Remote Control
Press any one of the VIDEO, S-VIDEO and COMPUTER buttons.
3. Projecting an Image (Basic Operation)
LAMP
STATUS
POWER
19
ON/STAND BY SOURCE AUTO ADJ. FOCUS
L-CLICK R-CLICK
MOUSE
VIDEO COMPUTER AUTO ADJ.
S-VIDEO LAMP MODE
VOLUME ASPECT HELP
PICTURE FREEZE
SELECT