Performance Specifications; Fa-Th16Xra20S - FA goods FA-TH16X100A31 User Manual

3. PERFORMANCE SPECIFICATIONS

3-1. FA-TH16XRA20S

Item
Number of I/O points, Input device numbers
Insulation method
Rated input voltage/current
Operating voltage range
Maximum number of contacts simultaneously ON
ON voltage/ON current
OFF voltage/OFF current
Input impedance
OFF→ON
Response time
ON→OFF
Minimum switching load
Maximum switching frequency
Mechanical life
Electrical life
Wiring method for common
External power supply
Current consumption
Withstand voltage, insulation resistance
Noise immunity
Operation indication
Socket
Module replacement count
Module mixing
Terminal block screw
Terminal block
Applicable wire
Installation Screw
method
DIN rail
Weight
Model
Voltage: 24VDC (CLASS 2), Current: Approx. 10mA (24VDC)
21.6 to 26.4VDC (24VDC±10% (ripple ratio: within 5%), CLASS 2)
10ms or less (excluding programmable controller response time)
12ms or less (excluding programmable controller response time)
1800 times/hr (ON 1 second or longer, OFF 1 second or longer)
100000 times or more (at contact side) at 24VDC, 100mA
Approx. 10mA when 24VDC (not including current consumption of programmable controller)
Between each input, between external power supply and inputs: 2500 VAC 1 minute, 10MΩ or
(based on noise simulator with noise frequency of 25 to 60Hz)
M3 screw, Number of terminals: 34P, 7.62mm pitch, Spring-up screw with finger protection cover
Tightening torque range: 58.8 to 88.2N·cm (6 to 9kgf·cm, 5.22 to 7.5lbf·in),
UL standard conformity tightening torque: 59N·cm, 5.22 lbf·in
22 to 14 AWG: 0.3 to 2.0mm
Tightening torque range: 78 to 118N·cm (8 to 12kgf·cm, 7 to 10lbf·in)
Applicable DIN rail: TH35-7.5Fe, TH35-7.5Al (compliant with IEC 60715)
9
FA-TH16XRA20S
16 points, X0 to XF
Relay
100% (3-directional attachment)
19.2VDC or higher / 8.1mA or higher
24VDC or lower / 1.0mA or lower
Approx. 2.2kΩ
24VDC 1mA or higher
20000000 times or more
All points independent
24VDC ±10% (ripple ratio: within 5%, CLASS 2)
higher
Simulator noise 500Vp-p, noise width 1μs
LED on with power supply ON and input ON
Yes (relay module replaceable)
50 times
Not possible
2 (when solderless terminals are used)
M4 × 0.7mm × 22mm or more
Approx. 300g