Introduction; General Specifications - FA goods FA-TH16X100A31 User Manual

1. INTRODUCTION

This manual describes the specifications and handling of the terminal module used in combination with
Mitsubishi Electric Corporation DC input modules.

2. GENERAL SPECIFICATIONS

Item
Operating ambient
temperature
Storage ambient
temperature
Operating ambient
humidity
Storage ambient
humidity
Vibration resistance
Shock resistance
Operating atmosphere
*1
Operating altitude
Installation location
Overvoltage
category *2
Pollution degree *3
*1: Do not use or store the products under pressure higher than the atmospheric pressure of altitude 0m. Doing so may cause
malfunction.
*2: This category indicates the section of the power supply to which the equipment is assumed to be connected between the public
electrical power distribution network and the machinery within premises.
*3: This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is
used.
Applicable standard
Frequency
Under intermittent 5 to 8.4Hz
vibration
8.4 to 150Hz
Under continuous 5 to 8.4Hz
vibration
8.4 to 150Hz
Compliant with JIS B 3502 and IEC 61131-2 (147m/s2 (15G), 3 times each in X, Y, and Z bidirections)
Specifications
0 to 55C
-25 to 75C
5 to 95%RH, non-condensing
5 to 95%RH, non-condensing
JIS B 3502, IEC 61131-2
Constant Half amplitude
acceleration
－
9.8m/s 2 (1G)
－
2
4.9m/s (0.5G)
No corrosive gases
2000m or lower
Inside a control panel
II or less
2 or less
8
Sweep count
3.5mm
10 times each in X, Y,
and Z directions
－
1.75mm
－
－