Download  Print this page

Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung TX-R3081WH Owner's Instructions Manual

Hide thumbs

Advertisement

I
N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box.
2
Connect the other end of
this cable to the "ANT 2
IN (Cable)" terminal on
the rear panel.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT
terminal on the splitter
and the IN terminal on the
cable box.
Incoming Cable
Splitter
Incoming Cable
English - 16
œ This terminal might be labeled
"ANT OUT", "VHF OUT" or
simply, "OUT".
œ This terminal might be labeled
"ANT IN", "VHF IN" or simply,
"IN".
Splitter
Cable Box
continued...

Advertisement

Table of Contents

   Also See for Samsung TX-R3081WH

   Related Manuals for Samsung TX-R3081WH

This manual is also suitable for:

Tx-r3081w

Comments to this Manuals

Symbols: 0
Latest comments: