Table of Contents
Advertisement
ASSEMBLY
1. Mount amber lights, one on each side, in the top slot of the warning light bracket. The red light is mounted on
the left side in the bottom slot of the bracket. The rubber washers and nuts are provided in the lights.
2. Attach warning light bracket (2) to mounting strap with two 3/8 x 1" bolts and locknuts.
3. Mount mounting strap (8) to each end of toolbar with a mounting bracket pad (7) on the bottom of the toolbar,
two ½" bolts, lock washers and nuts.
NOTE: Five different lengths of bolts are included, choose the appropriate length of bolt for toolbar size.
4. Attach wiring harness to lights.
5. Use cable ties to strap wiring harness to toolbar at regular intervals.
6600-181 LIGHT KIT
KEY
QTY.
PART NO.
1.
6
2515-405
2.
2
6600-263
3.
2
6600-522
4.
1
6600-523
5.
1
6600-524
6.
4
2502-237
7.
4
2520-255
8.
2
6600-496
9.
4
2520-352
10.
4
2525-352
11.
4
2502-362
4
2502-373
4
2502-371
4
2502-369
4
2502-374
12.
2
6600-446
DESCRIPTION
CABLE TIE, BLACK
WARNING LIGHT BRACKET W.A.
LAMP, AMBER W/BULB
LAMP, RED W/BULB
HARNESS, COMMON WIRING
3/8-16 X 1" HHCS GR 5 ZYD
3/8-16 LOCK HEX NUT ZYD
MOUNTING STRAP
½-13 HEX NUT ZYD
½ MED. LOCKWASHER ZYD
½-13 X 5" HHCS GR 5 ZYD
½-13 X 6" HHCS GR 5 ZYD
½-13 X 7" HHCS GR 5 ZYD
½-13 X 8" HHCS GR 5 ZYD
½-13 X 9" HHCS GR 5 ZYD
MOUNTING BRACKET PAD
33
Advertisement
Table of Contents
