Yetter 6300 Operator's Manual page 14

ASSEMBLY INSTRUCTIONS
Optional Second Toolbar
STEP 1. Hydraulically lower the coulter cart so that the coulters are touching a hard, level surface.
STEP 2. Remove the drawbar 6300-202 from the cart main frame. Bolt in the double bar extension 6300-209 and
reattach the drawbar using the 1" x 3" hex bolts and 1" locknuts. (Torque to 400 ft. lbs.)
STEP 3. Mount the additional hanger assembly on the tongue extension. Refer to STEP 1. of the assembly
instructions for the hanger bar assembly.
STEP 4. Install the 3/8" x 35" hydraulic hoses to the end of existing hoses of the transport lift using the 3/8" union
fittings.
14