Selecting The Sound Mode (Depending On The Model) - Samsung SP42Q2 Owner's Instructions Manual

Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
(depending on the model)
On-screen indication
Mono (Normal use)
Mono Mono
NICAM (Normal)
Stereo Mono
NICAM (Normal)
Dual-I Dual-II Mono
NICAM NICAM (Normal)
Mono (Normal use)
DUAL-I DUAL-II
Stereo Mono
(Forced mono)
ENG
41