Help Guide
IC Recorder
ICD-UX560 / ICD-UX560F / ICD-UX565F
Adding a track mark
You can add a track mark at a point where you want to divide a file later or you want to locate during playback. You can add a
maximum of 98 track marks to a single file.
While recording is in progress or paused, or while playback is in progress or on standby, press T-MARK
1
at the point you want to add a track mark.
The
(track mark) indicator flashes three times, and a track mark is added.
Note
You cannot add track marks to a protected file. To add track marks to a protected file, remove protection from the file first, then add track marks.
For instructions on protecting a file, see
Hint
Protecting a
file.
95