Samsung DynaFlat TX R2765 Owner's Instructions Manual page 14

I
N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
After you've made this connection, set the A/B switch to the "A" position for normal view-
ing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the
A/B switch to "B", you will need to tune your TV to the cable box' s output channel, which is
usually channel 3 or 4.)
14
Incoming
Cable
Splitter
Incoming
Cable
Splitter
Incoming
Cable
Splitter
Cable Box
Cable Box
RF (A/B)
Switch
Cable Box
RF (A/B)
Switch
RF (A/B)
Switch
TV Rear