Connecting An S-Vhs Vcr - Samsung DynaFlat TX R2765 Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This
connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the 1 AUDIO
INPUT jacks on the TV.
Make sure the jacks you are using are underneath the number "1."
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO INPUT
jack on the TV.
An S-video cable is usually included with an S-VHS VCR (If not, check your local
electronics store.)
16
VCR Rear Panel
Coaxial Cable
VCR Rear Panel
Audio Cable
VCR Rear Panel
TV Rear Panel
TV Rear Panel
TV Rear Panel
Video Cable
ANT IN
A
ANT IN