Rear Panel Jacks - Samsung DynaFlat TX R2765 Owner's Instructions Manual

Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are three sets of input jacks, you can connect three different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 19.
˛ AUDIO-VIDEO MONITOR
« ,fl VIDEO/AUDIO INPUT jacks
8
N T V
E W
TX-R2765/TX-R3065W
TX-R3265
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and AV2,
component 2 and AV3 input jacks are exclusive
relation with each other.
SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD
player.
Note: In S-Video mode, Audio Output depends
what kind of audio input source is connected to
the side audio input jacks (AV1).
TX-R3064W/TX-R3264
TX-R2764/TX-R2664W
ANT IN
‹ VHF/UHF
Connect to an antenna or to a cable TV system.
COMPONENT 1, 2 INPUT
jacks (480i/480p/1080i)
Connect to the audio and component output jacks
of a DVD player or Set-Top Box.