Storing Channels In Memory (Automatic Method) - Samsung DynaFlat TX R1635 Owner's Instructions Manual

O
P E R AT I O N

Storing Channels in Memory (Automatic Method)

1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~2 on
previous page.
Press the MENU button,
then press the or
button to select "Channel"
then press the ˇ or ˆ but-
ton.
2
Press the or button
to select "Auto program".
3
Press the ˇ or ˆ button.
The TV will begin
memorizing all of the
available channels.
4
After all the available channels are stored, the Channel menu
reappears. Press the EXIT button to exit.
Channel
ANT/CATV ˇ ˇ ANT ˆ ˆ
Auto Program ˆ ˆ
TV/AV ˇ ˇ TV ˆ ˆ
Fine Tune ˆ ˆ
Add/Erase ˆ ˆ
Move Select Exit
Channel
ANT/CATV ˇ ˇ ANT ˆ ˆ
Auto Program ˆ ˆ
TV/AV ˇ ˇ TV ˆ ˆ
Fine Tune ˆ ˆ
Add/Erase ˆ ˆ
Move Select Exit
Auto Program
ANT 30
Exit
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press the MENU button at any time
to interrupt the memorization
process and return to the Channel
menu.
21