Storing Channels In Memory (Automatic Method) - Samsung TXL 2791F Owner's Instructions Manual

O
P E R AT I O N

Storing Channels in Memory (Automatic Method)

1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~4
on previous page.
Press the MENU button,
then press the CH
ton twice to select
"Channel."
Press the VOL + button to
access the Channel sub-
menu.
2
Press the CH
select "Auto program".
3
Press the VOL + button.
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the MENU
button twice to exit.
Note: Channel auto program does not function when the
V-chip is active.
3.6
C T : TV O
HAPTER HREE PERATION
but-
button to
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the memorization process and return
to the Channel menu.