Table of Contents
Advertisement
When SW2 is in the UP position the Asymod III is disabled and the transceiver will function
normally on all modes as it comes from the factory.
When SW2 is in the DOWN position the driver and final are diverted to the Asymod III. At this
point, the Asymod III is enabled and the mode switch must be set to AM. The transceiver will
only transmit on AM via the Asymod III and will be only capable to receive on FM and SSB.
SW2 UP = stock operation
SW2 DOWN = Asymod III enabled
- 11 -
Advertisement
Table of Contents
Need help?
Do you have a question about the IIIs and is the answer not in the manual?
Questions and answers