Attaching Legs Instructions; Screw Legs Onto Table - hatch WePlaySmart Installation Instructions Manual

3. A L
TTACHING
3.1.

Screw Legs onto Table

WePlaySmart Table Installation Manual
I
EGS NSTRUCTIONS
1. With the table securely propped against a
sturdy surface or wall, screw in the power
leg into the position nearest the power
button.
Use care to not cross
thread the threaded
legs.
If you are adding wheel
TIP
casters, you may install
them before you attach
the legs.
2. Attach each of the remaining legs to the
underside of the table by screwing them in
one at a time.
3. Once the legs have been secured, rotate
them an additional turn to confirm they are
fully seated on the mounting plate.
Rotate legs an additional
turn to fully seat them.
4. If not already done, connect the power cord
to the top outlet on the table's power leg.
9