Table of Contents
Advertisement
4.2.
Perform Screen Alignment Check
The Table with WePlaySmart by Hatch is calibrated before shipment. The unit's multi-touch interface
may require calibration over time. Further functional tests are in the Functional Checklist 2.
WePlaySmart Table Installation Manual
3
1. Turn on the power button. WePlaySmart by
Hatch will automatically launch.
2. Using the keyboard, press CTRL+ SHIFT + T
(Which changes the interface to the Teacher
mode) to open the Main Menu.
3. Select Exit WePlaySmart then select OK.
NOTE: Test touch input for correct calibration.
If the touch is not accurate, perform Steps 4
thru 9 below.
11
Advertisement
Table of Contents
