Table of Contents
Advertisement
1.3.
Overview of the Assembly
1.3.1. Room Requirements
The table may be placed anywhere you desire, as long as there is a power outlet within 9 feet.
Ensure there is room for students to work at all sides of the table. Room temperatures and
humidity that are suitable for a classroom are sufficient for the location.
1.4.
Safety
Please read these
Warnings first.
damage to the equipment. Care is required when planning and installing this system.
Warning:
Use a hand cart (if available) to transport the table location to be installed.
Ensure you do not obscure or block any safety devices, such as fire alarms.
Small parts could be swallowed by children and should be kept out of their reach. Keep
your work area segregated from the usual room occupants.
Perform all installation work correctly according to this manual.
Never attempt to modify the unit.
1.5.
Preparing and Tools to Perform the Installation
To complete the installation, you do not need tools other than a number 2 cross tip (Phillips)
screwdriver. Two people are recommended to unpack the equipment.
WePlaySmart Table Installation Manual
The assembly involves unpacking the table and
hardware, and then installing the table legs.
Connecting the power and a functional check
complete the assembly
The procedure takes about 1 hour
Be sure to read this manual prior to installation to
ensure that all safety instructions are observed. These
items must be complied with to prevent injury or
6
Advertisement
Table of Contents
