Advertisement
8. Remove the developer roller.
10. Vacuum the doctor blade clean. Until new blades are available, we do not recommend that the doctor blade be removed or the
developer roller felt seals disturbed. The doctor blade can be easily cleaned by blowing the excess toner off, and wiping it down
with a lint-free cloth. Be very careful not to leave any lint behind!
11. Inspect the magnetic roller felts. If they are compressed (shiny), rough them up with a small screwdriver.
12. Clean the developer roller with a lint free cloth and a dedicated developer roller cleaner. Do not use any chemicals other than
a dedicated developer roller cleaner to clean the roller. Any type of alcohol cleaner will strip the conductive coating off the roller.
© 2015 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
BROTHER HL-L2300 SERIES TN630/660 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
9. Clean out any remaining toner from the hopper. Pay special
attention to the feed roller to make sure it is clean.
www.uninetimaging.com
Advertisement
