Advertisement
BROTHER HL-L2300 SERIES TN630/660 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
1. Vacuum the exterior of the cartridge.
2. On the gear side, remove the two screws on the large half end cap (end cap is in two separate pieces). Remove the end cap.
3. Remove the screw on the remaining smaller end cap, press in on the tab and remove the end cap.
4. Remove the gears and spring as shown.
5. Remove the E-ring and the developer roller shaft.
© 2015 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
www.uninetimaging.com
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
