Table of Contents
Advertisement
To Erase All Numbers In Redial Memory
1. Press the Redials soft key in the Standby mode.
2. Press the All Erase soft key. The display prompts you to
confirm the setting.
3. Press the Yes soft key. You hear a beep and the phone
returns to the Standby mode after clearing the redial
memory.
Battery Level Indicator
A
icon is continuously displayed in the upper line of the
LCD window. The
icon shows the level of your battery.
The more bars you see, the more power you have left.
H S ( 1 )
S A M S U N G
Flat
When the battery is weak and a few minutes of talk time
remain, you will hear a warning tone and the
When the battery becomes too weak for the phone to operate,
the handset will automatically turn off. Place the handset on
the base unit to charge the handset battery.
24
General Functions
B S ( 1 )
Full
icon blinks.
Out of Range Indicator
Your phone indicates the received signal strength through the
strength icon. The more bars you see, the stronger the signal
is. If the handset is too far from the base unit and the handset
cannot properly engage the telephone line, the
in the LCD window.
Signal
S t rength Icon
H S ( 1 )
S A M S U N G
If you move out of range during a call, the telephone line
might be disconnected and the handset returns to the Standby
mode. Check if the icon blinks in the LCD window. If so, move
the handset closer to the base unit.
Adjusting Voice Volume
During calls, pressing the
phone affects the ear piece volume.
You can adjust the volume from level 1 to 5, and it is preset to
level 3. The voice volume is displayed as bars in the LCD
window. The more bars you see, the louder the volume is.
V o i c e V o l u m e
[ _
F l a s h
Ear piece volume indicator
icon blinks
B S ( 1 )
or
keys on the side of the
]
R e d i a l s
General Functions
25
Advertisement
Table of Contents
