Table of Contents
Advertisement
Countdown timer
For the countdown timer to be used, the appliance must be switched on but all
the cooking zones must be switched off.
1. Touch the timer control
will appear in the timer display.
. Set the desired period of time using the timer setting selectors (
The countdown timer function is now activated and the remaining time
appears in the timer display.
To adjust the remaining time, touch the timer control
change the setting using the timer setting selectors (
powEr boosT CoNTrol
The power boost function
cooking zones. (example : bring a large volume of water to the boil)
The power boost function is activated for maximum 10 minutes for each cooking
zones.
After these times, the cooking zones automatically return to power level
In certain circumstances, the Power boost function may be deactivated
automatically to protect the internal electronic components of the hob.
powEr maNagEmENT
The cooking zones have a maximum power available
to them.
If this power range is exceeded by switching on
the power boost function , Power Management
automatically reduced the heat setting of paired
another cooking zone.
• Left side : No.1 and No.2 is paired cooking zone
• Right side : No.3 and No.4 is paired cooking zone
The indicator for this cooking zone changes from the
heat setting set to maximum possible heat setting.
• Example
last heat setting of cooking
zone (No.3)
Power Boost
If the supply voltage is less than AC220V~, Power Management can be activated
when the heat setting is
sensor.
makes additional power available to the each
paired another cooking zone's heat setting (No.4)
original heat setting
15 level
.
sensor. and
or
).
automatically changed heat
setting
13 level
hob use _1
or
).
Advertisement
Table of Contents
