Commands In Ld 32 To Support The Flash Download Feature - Meridian M3902 Description And Installation

Commands in LD 32 to support the Flash Download feature

LD 32 – Flash Download commands (Part 1 of 2)
Prompt Response
. FDLU l s c u
FDLI l s c u
FDLF l s c u
FWVU l s c u
FDLS
FDLC
FSUM
M3900 Series Meridian Digital Telephones Description, Installation and Administration
Configure the M3900 Series Meridian Digital Telephone
Initiate conditional download to one telephone.
Terminal number.
l = loop address.
s = shelf address.
c = card address.
u = unit address.
Initiate conditional download to an M3900 Series telephone
when it becomes idle.
initiate a forced download to an M3900 Series telephone
regardless of its version and state.
Query and print the firmware versions currently on an M3900
Series telephone.
Initiate system-wide flash download to all, or a specified type of
M3900 Series telephones, based on parameters specified in LD
97
Cancel or gracefully stop the system-wide flash download for
M3900 Series telephones.
Display summary report of current firmware versions on all
M3900 Series telephones.
The format of the report is as follows:
* * M390x SUMMARY REPORT * *
dd - ON DISK
ff (cc) - nnnn SETS FOUND
ff (cc) - nnnn SETS FOUND
Where:
x = 2 to 5 for M3902 to M3905
dd = the flash firmware version found on the system disk
ff = the downloadable flash firmware version found on the sets
cc = the core firmware found on the sets
nnnn = the number of sets found with firmware version ff (cc)
Description
Page 73 of 174