Agilent Technologies 490 Micro GC Installation And Configuration page 2

Natural gas analyzer

Hide thumbs Also See for 490 Micro GC:

Agilent Technologies

To establish the connection between EZReporter and the

Agilent data system, two steps are important:

Calibration. For creating a calibration method or

performing calibration runs, find detailed instructions in

either:

•

EZChrom Elite online help and tutorial

•

OpenLAB CDS online help and tutorial

Exporting Raw Data. Configure the Agilent data system

(EZChrom Elite or OpenLAB CDS, either edition) to

export raw data as described in:

•

EZReporter Quick Start Guide—EZChrom Edition

•

EZReporter Quick Start Guide—ChemStation Edition

The material contained in this document is provided "as is," and is subject to being

changed, without notice, in future editions. Further, to the maximum extent permitted by

applicable law, Agilent disclaims all warranties, either express or implied, with regard to

this manual and any information contained herein, including but not limited to the implied

warranties of merchantability and fitness for a particular purpose. Agilent shall not be liable

for errors or for incidental or consequential damages in connection with the furnishing,

use, or performance of this document or of any information contained herein. Should

Agilent and the user have a separate written agreement with warranty terms covering the

material in this document that conflict with these terms, the warranty terms in the separate

agreement shall control.

No part of this manual may be reproduced in any form or by any means (including electronic

storage and retrieval or translation into a foreign language) without prior agreement and

written consent from Agilent Technologies, Inc. as governed by United States and

international copyright laws.

G3582-90003

First edition, May 2012

Printed in The Netherlands

P.O. Box 8033

4330 EA Middelburg

The Netherlands