Shutdown Timer; Information; Auto Upgrading; Equipment Formatting - Pyle PDAP18BK User Manual

4. Shutdown Timer

Shutdown Timer means the forced shutdown in the playback state.
Press the or key to select or set the shutdown time. The
shutdown time is selectable among 1-99 minutes. Selection can be
determined by pressing the MENU key.

5. Information

Information: There is such information for inquiry as software version
of player and disk space.

6. Auto Upgrading

This device supports local upgrading. When a new rmware is released
o cially, it can be copied to the disk system for auto upgrading.

7. Equipment Formatting

Equipment Formatting: Pressing the MENU key to enter the interface
rst, and then press the
equipment. After that, you can con rm it and quit by pressing the
MENU key (Note: All the data can't be recovered after formatting).

8. Factory Setting

Factory Setting: Restore the device to factory setting
CHAPTER V: CONNECTING A COMPUTER

1. Connecting A Computer

To download and upload les, please
connect the USB socket to a PC and this
device with supporting USB cable, after
which this device will start up automatically.
For the rst connection, the computer will
prompt you to create the driver information
base and nd new hardware and then it will
automatically detect this device. At this time,
the screen will show image that means
successful connection.
12
www.PyleUSA.com
or key to select whether to format the
2. File Upload & Download
Under Windows system, this device will show the disk drive number.
3． Disconnecting A Computer
After the le transfer ends, please close
MY Computer or Explorer and
then pull out the cable as follows:
For users with operating systems such as WINDOWS 2000 and
WINDOWS 2000, please proceed in the operating steps shown below:
• Click the green arrowhead at the lower right corner of the computer.
• Click the Stop USB Disk – Driver.
• Click OK and pull out the USB cable, after the dialog box Safely
Remove Hardware appears.
Reference: The image tips for di erent operating systems are slightly
di erent. The above photo is for reference only.
4. Battery & Charging
This device has the built-in lithium battery. It can be charged via
connecting this device with USB cable. The battery icon during
charging will move circularly. After the battery is fully charged , the
corresponding icon ( ) will appear. Battery can be fully charged for
about 2.5 hours.
Note: You can charge using an adapter or by using a 5V and 1A
maximum output charger.
13
www.PyleUSA.com