Table of Contents
Advertisement
General Information
Model 11848A
RECOMMENDED TEST EQUIPMENT
Table 1 lists the test equipment and accessories recommended for use in testing, adjusting, and servicing
the Interface. If any of the recommended equipment is unavailable, instruments with equivalent
minimum specifications may be substituted.
Tests for the Interface are performed during the HP 3048A Performance Tests which are available in
the HP 3048A Operating Manual in Appendix B, Performance Tests.
Table 1. Recommended Test Equipment
Instrument Type
Dynamic Signal Analyzer
Counter (550 MHz)
Function Generator
Oscilloscope
Power Meter and Sensor
Model Number
HP 3561A
HP 5383A, HP 5386A
HP3312A.HP3325A
HP 1740A
HP 435B or HP 436A with
HP8481AorHP8482A
Use*
A.C.P.T"
P
P.T
T
T
* A=Adjustments, C=Functional Checks, P=Performance Tests, Troubleshooting
** The HP 3561A is included with the HP 3048A system.
OPTIONS AVAILABLE
Options are variations on the standard instrument which can be ordered during the purchase.
Electrical Options
Option 201: Add High Frequency Phase Detector. This option adds a 1.2 to 18 GHz phase
detector to the Interface. This phase detector extends the range of carrier frequencies that can be
demodulated within the Interface without external down conversion by the System. All of the HP 3048A
specifications from 1.6 to 18 GHz carrier frequency are valid with this option.
Mechanical Options
Option 907: Front-Handle Kit. front handles are provided when Option 907 is ordered. After shipment,
you can order a Front-Handle Kit as HP part number 5061-0089.
Option 908: Rack-Flange Kit Rack flanges are provided for the HP 11848A Phase Noise Interface
when Option 908 is ordered. After shipment, you can order a Rack-Flange Kit as HP part number
5061-0077.
Option 909: Rack-Flange and Ront-Handle Combination Kit. This is not a Front-Handle Kit and a
Rack-Flange Kit packaged together; it is a unique part that combines both functions. Combination kits
are provided for the HP 11848A Phase Noise Interface when Option 909 is ordered. After shipment,
you can order a Rack-Flange and Front-Handle Combination Kit as HP part number 5061-0083.
6
Advertisement
Table of Contents
