Samsung SyncMaster 320P Owner's Manual page 45

Video signal. (Off/On)
1) PIP
- The direct button on the remote control is 'PIP' button.
: Turns the PIP Screen Off/On.
2) Source
- The direct button on the remote control is the 'SOURCE'
button.
: AV / S-Video / Component Mode
: AV / S-Video Mode
: PC / BNC / DVI Mode
: PC / DVI Mode
: Selects the input source for the PIP.
3) Swap
- The direct button on the remote control is 'SWAP' button.
: Swaps the contents of the PIP and main image.
The image in the PIP window will appear on the main
screen, and the main screen image will appear in the PIP
window.
4) Size
- The direct button on the remote control is 'SIZE' button.
: Changes the Size of the PIP window.
If you select
will not be activated.
5) Position
: Change the Position of the PIP window.
6) Transparency
: Adjusts the Transparency of PIP windows.
Available Modes : PIP
Edit Name Name the input device connected to the input jacks to make
your input source selection easier.
1) PC
2) BNC
3) DVI
4) AV
5) S-Video
6) Component
Picture
PC / BNC /DVI Mode
More than one PIP cannot be overlapped on
screen as BNC and the component use the same
terminal.
Off
On
PC / DVI
BNC
AV / S-Video
Component
, , in Size, Position and Transparency
High
Medium
Low
Opaque
1) PIP
2) Source
3) Swap
4) Size
5) Position
6) Transparency