Rcm-1 Diagnostic Leds - Table 1 - Siemens RCM-1 Installation Instructions Manual

LED
Any Trouble
XMIT Enable
XMIT A
XMIT B
XMIT F
LM1
GM1
GM2
RCM-1 DIAGNOSTIC LEDS
COLOR
Yellow Lights when the RCM-1 cannot communicate with the MXL.
Yellow Lights whenever the RCM-1 transmits a message to the MXL.
Green Lights when the RCM-1 transmits voice using the copper
wire RECV connections.
Green Lights when the RCM-1 transmits voice using the copper
wire XMIT connections.
Green Lights when the RCM-1 transmits voice using any of the fiber
optic ports.
Green Lights when the RCM-1 is in local mode.
Flashes when there is no valid carrier on the riser.
Green Lights when the RCM-1 is in global mode 1.
Flashes when there is no valid carrier on the riser.
Green Lights when the RCM-1 is in global mode 2.
Flashes when there is no valid carrier on the riser.
RCM-1 Module Board
TABLE 1
FUNCTION
Figure 2
4