Specifications; Input Power; Operating Environment - HP Elite x3 User Manual

8

Specifications

Input power

The power information in this section may be helpful if you plan to travel internationally with the lap dock.
The lap dock operates on DC power, which can be supplied by an AC or a DC power source. The AC power
source must be rated at 100–240 V, 50–60 Hz. Although the lap dock can be powered from a standalone DC
power source, it should be powered only with an AC adapter or a DC power source supplied and approved by
HP for use with this lap dock.
The lap dock can operate on DC power within the following specifications. The voltage and current for your lap
dock is located on the regulatory label.
Input Power
Operating voltage and current
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.

Operating environment

Factor
Temperature
Operating (writing to optical disc)
Nonoperating
Relative humidity (noncondensing)
Operating
Nonoperating
Maximum altitude (unpressurized)
Operating
Nonoperating
26 Chapter 8 Specifications
Rating
15 V dc @ 3 A – 45 W USB-C
Metric
5°C to 35°C
-20°C to 60°C
10% to 90%
5% to 95%
-15 m to 3,048 m
-15 m to 12,192 m
U.S.
41°F to 95°F
-4°F to 140°F
10% to 90%
5% to 95%
-50 ft to 10,000 ft
-50 ft to 40,000 ft