Planet Networking & Communication GSW-1601 User Manual

1. Package Contents
Thank you for purchasing PLANET 16-/24-Port
10/100/1000BASE-T Unmanaged Gigabit Ethernet Switch,
GSW-1601/GSW-2401. "Gigabit Ethernet Switch"
mentioned in this User's Manual refers to the GSW-1601/
GSW-2401.
Open the box of the Gigabit Ethernet Switch and carefully
unpack it. The box should contain the following items:
Gigabit Ethernet Switch x 1 Power Cord x 1
Accessories x 1 User's Manual x 1
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them again
to repack the product in case there is a need to return it to
us for repair.
- 1 -
2. Product Features
Physical Port
z 16/24 10/100/1000BASE-T Gigabit Ethernet ports
z Supports auto MDI/MDI-X function
Layer 2 Features
z Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u
100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet stan-
dards
z Features Store-and-Forward mode with wire-speed
filtering and forwarding rates
z Integrated address look-up engine, supporting 8K abso-
lute MAC addresses
z 10K Jumbo packet support
z Power Saving ability for Green networking
z IEEE 802.1Q VLAN packet transparency support
z IEEE 802.3x flow control for full duplex operation and
back pressure for half duplex operation
z Hardware based 10/100BASE-TX, half/full duplex and
1000BASE-T full duplex mode, flow control and auto-
negotiation
z Automatic address learning and address aging
z Supports CSMA/CD protocol
- 2 -
Hardware Features
z 100~240V AC, 0.3A, 50~60Hz universal power input
(GSW-1601)
z 100~240V AC, 0.6A, 50~60Hz universal power input
(GSW-2401)
z FCC, CE class A compliant
3. Product Specifications
Product GSW-1601 GSW-2401
Hardware Specifications
Hardware Version 7
10/100/1000BASE-T
16 24
MDI/MDIX Ports
Throughput
23.8Mpps 35.7Mpps
(packet per second)
Switch Fabric 32Gbps 48Gbps
Weight 1.8kg 1.9kg
Power Consumption/ 13.5 watts/46
8.9 watts/30 BTU
Dissipation BTU
- 3 -
100~240V AC, 100~240V AC,
Power
0.3A, 0.6A,
Requirements
50-60Hz 50-60Hz
Dimensions
440 x 180 x 44mm, 1U height
(W x D x H)
Switch Processing
Store-and-Forward
Scheme
Address Table 8K entries
Jumbo Packet Size 10K
Back pressure for half duplex, IEEE
Flow Control
802.3x Pause Frame for full duplex
Operating: 0~50 degree C
Temperature
Storage: -10~70 degree C
Operating: 5% to 95%
(non-condensing)
Humidity
Storage: 5% to 95%
(non-condensing)
Standards Conformance
Regulatory
FCC Part 15 Class A, CE
Compliance
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
Standards
IEEE 802.3ab (Gigabit Ethernet)
Compliance
IEEE 802.3x (Full-Duplex Flow
Control)
- 4 -
4. Switch Front Panel
Figures 1 & 2 show the front panels of the GSW-1601 and
GSW-2401.
2 4 6 8 10 12 14 16
16-Port Gigabit Ethernet Switch
LNK ACT
LNK/ACT
2 4 6 8 10 12 14 16
1000
LNK/ACT
1 3 5 7 9 11 13 15
1000
GSW-1601 PWR
1000 10/100 1 3 5 7 9 11 13 15
Figure 1: GSW-1601 Front Panel
2 4 6 8 10 12 14 16 18 20 22 24
24-Port Gigabit Ethernet Switch LNK ACT
LNK/ACT
2 4 6 8 10 12 14 16 18 20 22 24
1000
LNK/ACT
1 3 5 7 9 11 13 15 17 19 21 23
1000
GSW-2401 PWR 1000 10/100
1 3 5 7 9 11 13 15 17 19 21 23
Figure 2: GSW-2401 Front Panel
- 5 -
LED Indicators
GSW-1601/GSW-2401
System
LED Color Function
Lights to indicate that the Switch has
PWR Green
power.
Per 10/100/1000BASE-T Port
LED Color Function
Lights to indicate the link through that
port is established successfully.
LNK/ACT Green Blinks to indicate that the Switch is
actively sending or receiving data over
that port.
Lights to indicate the port is running
at 1000Mbps.
1000 Green
When off, it indicates that the port is
operating at 10/100Mbps.
- 6 -
5. Switch Rear Panel
Figures 3 & 4 show the rear panels of the GSW-1601 and
GSW-2401.
100-240V~ 50/60Hz 0.3A
Figure 3: GSW-1601 Rear Panel
Figure 4: GSW-2401 Rear Panel
1. The device is a power-required device,
meaning it will not work till it is powered. If
your network should be active all the time,
please consider using UPS (Uninterrupted
Power Supply) for your device. It will prevent
you from network data loss or network
downtime.
Power
Note
2. In some area, installing a surge suppression
device may also help to protect your Gigabit
Ethernet Switch from being damaged by
unregulated surge or current to the Switch or
the power adapter.
- 7 -
6. Installing the Switch
This part describes how to install your Gigabit Ethernet
Switch and make connections to it. Please follow the
procedure below:
This Gigabit Ethernet Switch does not need
software configuration.
Note
Desktop Installation
To install the Gigabit Ethernet Switch on the desktop,
simply follow these steps:
Step 1: Attach the rubber feet to the recessed areas on
the bottom of the Gigabit Ethernet Switch.
Step 2: Place the Gigabit Ethernet Switch on the desktop
near an AC power source.
Step 3: Keep enough ventilation space between
Gigabit Ethernet Switch and the surrounding
objects.
When choosing a location, please keep in mind
the environmental restrictions discussed
Section 3 under Product Specifications.
Note
- 8 -
the
in