Samsung SyncMaster 920LM User Manual page 23

frequency by referring to the
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press Enter at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse .
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard .
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor .
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor . This information will not affect the actual execution
of X-Window.
10. You have finished setting up your monitor.
Execute X-Window after setting other requested hardware.
Preset Timing Modes in the user guide.