Samsung SyncMaster 920LM User Manual page 14

Hide thumbs Also See for SyncMaster 920LM:

Table of Contents

Connecting the Monitor

Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

2-1. Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[ RGB IN ]

2-2. Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-sub connection cable.

Turn on your computer and monitor. If your monitor displays an image, installation is

completed.

Using the Stand

Table of Contents