Cisco 1700 Series Configuring page 27

Configuration Example
The following example shows a Cisco 1760 router configured with MLP Bundling:
!
interface Multilink1
ip address 10.0.0.9 255.255.0.0
load-interval 30
keepalive 1
max-reserved-bandwidth 100
service-policy output CISCO
no cdp enable
ppp multilink
ppp multilink fragment-delay 10
ppp multilink interleave
multilink-group 1
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
pvc 0/38
vbr-rt 192 192 1000
tx-ring-limit 2
protocol ppp Virtual-Template1
!
dsl operating-mode auto
no shut
!
!
interface ATM1/0
no ip address
no atm ilmi-keepalive
pvc pvc 6/65
vbr-rt 192 192 1000
tx-ring-limit 2
protocol ppp Virtual-Template1
!
!
dsl operating-mode auto
no shut
!
!
!
interface Virtual-Template1
no ip address
load-interval 30
keepalive 1
ppp multilink
ppp multilink multiclass
multilink-group 1
!
For information on how to verify and troubleshoot MLP Bundling, please refer to Enhanced Voice and
QoS for ADSL and G.SHDSL on Cisco 1700 Series, Cisco 2600 Series, and Cisco 3600 Series Routers.
OL-3317-03
Configuring an ADSL WAN Interface Card on Cisco 1700 Series Routers
Configuring Quality of Service Parameters
27