Download Print this page

Advertisement

Cisco 1700 Router Overview
This chapter introduces the Cisco 1700 router, also referred to in this guide as the router,
and covers the following topics:
Key Features
Rear-Panel Ports and LEDs
Front-Panel LEDs
Router Memory
Unpacking the Router
Additional Required Equipment
C H A P T E R
Cisco 1700 Router Overview 1-1
1

Advertisement

   Also See for Cisco 1700

   Related Manuals for Cisco 1700

   Summary of Contents for Cisco 1700

  • Page 1

    C H A P T E R Cisco 1700 Router Overview This chapter introduces the Cisco 1700 router, also referred to in this guide as the router, and covers the following topics: • Key Features • Rear-Panel Ports and LEDs •...

  • Page 2: Key Features

    C O L Key Features The Cisco 1700 router is a small, modular desktop router that links small- to medium-size remote Ethernet and FastEthernet LANs over one to four WAN connections to regional and central offices. Table 1-1 lists the router key features.

  • Page 3

    Router can be secured to a desktop or other surface using Kensington lockdown equipment. Cisco ConfigMaker support You can set up networks that include the Cisco 1700 router using the Cisco ConfigMaker application, a wizards-based software tool that helps you easily configure and address Cisco routers, access servers, hubs, switches, and networks.

  • Page 4

    (full- or half-) of the device to which it is connected and then operates at the same speed and in the same duplex mode. Auxiliary port Connects to a modem for remote configuration with Cisco IOS (black) software. Console port CONSOLE Connects to a terminal or PC for local configuration using...

  • Page 5

    WAN interface card slot No label Supports one Cisco WAN interface card. For detailed (WIC1) information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card. Power socket +5, +12, -12 VDC Connects the router to the external power supply.

  • Page 6

    Refer to Table 3-1 in the “Troubleshooting” chapter for information on how to use this LED for router diagnostics. Green Blinks when there is network activity on the Ethernet port. Yellow Blinks when there are packet collisions on the local Ethernet network. Cisco 1700 Router Hardware Installation Guide...

  • Page 7

    ISDN cards—On solid when the second ISDN B channel is up for the card in the WIC1 slot. 2-port serial cards—Blinks when there is data being sent to or received from the second port on the 2-port card in the WIC1 slot. Cisco 1700 Router Overview 1-7...

  • Page 8: Router Memory

    Cisco IOS software. The Flash memory structure can store multiple copies of the Cisco IOS software. You can load a new level of the operating system in every router in your network and then, when convenient, upgrade the whole network to the new level.

  • Page 9: Amounts Of Memory

    [cisco-ferrari2 121] Copyright (c) 1986-1998 by cisco Systems, Inc. Compiled Tue 26-May-98 19:58 by . . . cisco 1700 (MPC860) processor (revision 0x00) with 12288K/4096K bytes of memory. Processor board ID 0000 (1314672220), with hardware revision 0000 M860 processor: part number 0, mask 32 Bridging software.

  • Page 10: Unpacking The Router

    T/C H1 ET H AC T AC T/C H0 AC T/C H1 CO L Product documentation Cisco 1700 router Console cable (light blue, RJ-45-to-DB-9) Power supply Modem cable adapter Power cord (black) (gray, DB-25-to-DB-9) 1-10 Cisco 1700 Router Hardware Installation Guide...

  • Page 11: Additional Required Equipment

    Additional Required Equipment Additional Required Equipment Depending on your local network and which Cisco WAN interface cards you install in your router, you will require other items, listed in Table 1-5, to complete your router installation. Table 1-5 Additional Required Equipment...

  • Page 12

    Additional Required Equipment 1-12 Cisco 1700 Router Hardware Installation Guide...

Comments to this Manuals

Symbols: 0
Latest comments: