Samsung SyncMaster 770P User Manual page 12

Use this button for power the monitor on and off, change the input source,
or perform Auto Adjustment.
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
Kensington Lock
Signal Box
See Connecting the Monitor
Power On/Off : When you press the power button, the monitor is
on/off.
>>Click here to see an animation clip
Input Source : When you press the power button, the input source may
be changed to Analog or Digital, blinking once with blue lihgt.
>>Click here to see an animation clip
Auto adjustment : When you press the power button, the Auto
Adjustment function is activate, blinking twice with blue light.
(Analog only)
>>Click here to see an animation clip
described in the manual for further information regarding power saving
The Kensington lock is a device used to physically fix the system
when using it in a public place.
(The locking device has to be purchased separately. )
1. DC 14V : Connect the DC 14V adapter for the monitor to the power
port on the Signal Box. Plug the power cord for the
monitor into a nearby outlet.
Connect the 'DVI-A to D-SUB' cable to the DVI-I port on
2. DVI-I :
the Signal Box.
for further information regarding cable connections.