Lorex LNR6100 Series Quick Networking Manual

Before You Start:

• Make sure you • Connect your NVR
have a router to your router
and high-speed using an Ethernet
Internet access cable (see the
(not included). Quick Connection
Guide for details).
1
2 Find Your Device ID
The Device ID is printed on a label on the top panel of the NVR.
Device ID: xxxxxxxxxxx
Record your information below:
DEVICE ID:
LNR6100 SERIES
Quick Networking Guide
• Upgrade your NVR • Please note that an upload
firmware and client speed of 2 Mbps is required
software or mobile for remote video streaming
app to the latest (3 Mbps and above
versions. recommended). Up to 3
devices may connect to the
system at the same time.
2
PC / Mac Setup
a Download and install the client software:
• PC Users: Download and install the FLIR Cloud Client
Software for PC from lorextechnology.com.
• Mac Users: Download and install the FLIR Cloud Client
Software for Mac from lorextechnology.com. Double-
click to extract the software, then drag the software to
Applications.
Once installation is finished, double-click the
b
FLIR Cloud Client™ icon (
) on the desktop or
Applications list.
Log into the Client Software using the user name
c
(default: admin) and password (default: admin) and
then click Login.
User Name: admin
Password: admin
d
Click Add Device.
Congratulations! You can now connect over the Internet to view and playback video on your computer.
LNR6100 Series
4K Network Video Surveillance Recorder
Enter the following information:
e
1 Device Name: Choose a name for your system.
2 Device ID: Manually enter the Device ID printed on the label.
3 Client Port: Enter the Client Port (default: 35000).
User Name: Enter the NVR's User Name
4
(default: admin).
5 Password: Enter your new, secure password recorded on the
Quick Connection Guide.
EXAMPLE
1
2
3
4
5
f
Click then .
Click and drag Default Group to the display
g
window to open your cameras in live view.
Click Add.
LNR6100_QNG_EN_R1