ADCP-75-246 • Issue 1 • 6/2008
5.1.4
Tools and Additional Materials Required For Mounting
The tools and any additional materials required for mounting the 2x1 microBTS are dependent
on the mounting system. The following sections list the tools required for the various mounting
systems.
Wood-Framed Wall Mounting
• 9/16-inch wrench
• 1/2-inch wrench (2)
• Torque wrench with 3/16-inch hex key socket
• Drill
• Pencil or marker
• 4 foot x 2 foot sheet of pressure-treated 3/4-inch plywood
• Fasteners and tools for securing the 3/4-inch plywood to wall
• 3/16-inch standard drill bit
Masonry Wall Mounting
• 9/16-inch wrench
• 1/2-inch wrench (2)
• Torque wrench with 3/16-inch hex key socket
• Drill
• Pencil or marker
• 5/8-inch masonry drill bit
Wooden Utility Pole Mounting
• 9/16-inch wrench
• 1/2-inch wrench (2)
• Torque wrench with 3/16-inch hex key socket
• Drill
• Pencil or marker
• 3/16-inch standard drill bit
Metal Utility Pole Mounting
• Clamp banding tool (BT1HT from Panduit)
• 1/2-inch wrench (2)
• Torque wrench with 3/16-inch hex key socket
Page 10
© 2008, ADC Telecommunications, Inc.